Ribbon Tweeter
|
Swans-R2 Pro |
Very Big Vibration area, Vibration Quality can be Ignored,
It supplied extremely quick transient state front and
back characteristic
- Power Handling 30 watt
- Sensitivity 99 db |
Swans-R2L |
The ribbon loudspeaker's voice coil is manufactured in the surface of the film membrane, which can sync
and equally drive air.
- Power handling 30 watt
- Sensitivity 90 db |
Swans-R2E |
This tweeter has large membrane area providing higher power handling and substantially extended low
end cut-off frequency.
- Power handling 30 watt
- Sensitivity 93 db |
Swans-R1E |
Very high planar transducers for their unsurpassed clarity, transparency and ability to deliver every tiniest
musical detail.
- Normal Impedence 5 ohm watt
- Power Handling 15 watt
- Sensitivity 94 db |
Swans-R2C |
R2C has a resistive impedance in the audio frequency range. easy crossover design.
linear phase response, accurate musical rhythm
and imaging.
- Power handling 60 watt
- Sensitivity 93 db |
Swans-R8 |
The Performance of intermediate frequency and intermediate high frequency has pivotal status
in sound playback.
- Nominal Impedance 6 ohm
- Power Handling 30 watt
- Sensitivity 95 db |
Swans-Diva R3 |
The driving systems composed of 2 layer of Neodymium Iron Baron magnet create a push-pull actuation, which
fill excellent absorb sound materials Quick response, Low Distortion, Clean Sound.
- Nominal Impedance 4 ohm
- Power Handling 30 watt |
Swans-R1L |
Inovation of pointing design, Round ribbon ring film membrane optimized radiation angle panel design.
- Nominal Impedance 4 ohm
- Power Handling 30 watt |
Swans-R1LL |
The biggest continual sound pressure output can reach 106dB SPL, and it may reach 110 dB SPL
for the instantaneous peak value response
- Nominal Impedance 5 ohm
- Sensitivity 94 db |
Swans-R1C |
Unlike conventional tweeters and electrostatic speakers, the R1C has an extremely wide sound dispersion in
the horizontal plane.
- Nominal Impedance 5 ohm
- Sensitivity 94 db |
